Product Details:
Twist Drill Capacity | 11000N |
Warranty | 6 months |
Weight | 12KG |
No Load Speed | 250-450 rpm |
Power Consumption | 1150W |
Model Name/Number | SWC50 MAX |
Product Details:
Drilling Diameter | 40 mm |
Width | 55mm |
Brand | Ralli Wolf |
Model Name/Number | Innova 40 |
Warranty | 6 months |
Power Consumption | 1200W |
No Load Speed | 400Rpm |
Weight | 13.3Kg |
Product Details:
Drilling Diameter | 13 mm |
Twist Drill Capacity | Core dia 50x50mm deep |
Width | 179 mm Height x 100 mm W X 329 mm L |
Brand | ROTA BROACH |
Model Name/Number | Element 50 low profile 1/ low profile 3 |
Warranty | 1 year |
Power Consumption | 110V/1200W / 230V/1200W |
No Load Speed | 250-500 RPM |
Weight | 11 kg |
We are authorized dealer of Rotabroach. Largest capacity low profile magdrill on the market
Cutting diameter and depth of cut to 50mm
1200W motor with variable speed setting
Maximiser performance machine and tool life
Cutsmart technology
Product Details:
Minimum Order Quantity | 1 Piece |
Drilling Diameter | 13 mm |
Twist Drill Capacity | 050 x 50mm Deep - 23mm with MT Shank Drill |
Width | Magnet Size 200mm x 98mm |
Brand | Rotabroach |
Warranty | 6 months |
Power Consumption | 110V 1500W / 230V 1500W |
No Load Speed | Low Gear 100 - 265 RPM / High Gear 200 - 500 RPM |
Weight | 15kg |
Magnet Force | 13,500N |
Motor Output | 110V 1500W / 230V 1500W |
Is It Variable Speed | Variable Speed |
We are authorized dealer of Rotabroach. Large capacity drill, forversatility and power.• Reversible features to allowtapping.• Maximise performance,machine and tool life.• Cutsmart?' technology
We believe in quality delivery only
Additional Information:
Product Details:
Drilling Diameter | 16mm |
Twist Drill Capacity | 75x75mm deep- 26mm with MT drill |
Width | 214mm |
Brand | Rotabroach |
Model Name/Number | Element 75/1,Element 75/3 |
Warranty | 6 months |
Power Consumption | 110V/1800W / 230V/1800W |
No Load Speed | Low Gear 70-200 RPM / High Gear 180-500 RPM |
Weight | 23kg |
We are authorized dealer of Rotabroach. Large capacity machine for drilling larger holes to 75mm
Forward and reverse functionality means you can also tap
Maximise performance machine and tool life
Cutsmart technology
Product Details:
Drilling Diameter | 32 mm |
Twist Drill Capacity | CORE 100x100mm deep- 31.75mm with MT3 drill |
Width | 733H X 230MM W X 370MM LENTH |
Brand | Rotabroach |
Model Name/Number | Element 100/1 Element 100/3 |
Warranty | 6 months |
Power Consumption | 110V/2000W / 230V/2000W |
No Load Speed | RPM 45TO129 70 TO 208 150 TO 434 240 TO 700 |
Weight | 25kg |
Product Details:
Drilling Diameter | 12-35mm |
Twist Drill Capacity | 13mm |
Width | 55mm |
Brand | BDS |
Model Name/Number | Basic35 |
Warranty | 6 months |
Power Consumption | 1050W |
No Load Speed | 450Rpm |
Product Details:
Frequency | 50 Hz |
Tool Holder | Keyless 19 mm Weldon (3/4 inch) |
Core drill short 30 mm | 12-30 mm |
Weight | 9.9 Kg |
Magnet Size | 80 x 160 x 41.5 mm |
Stroke | 70 mm |
Motor Output | 800 Watt |
Swivel Base | No |
Speed range 1 | 460 min-1 |
Voltage | 230 V AC , 50-60Hz |
Quick Change Drill Chuck System | Keyless 19 mm |
Product Details:
Core drill short 30 mm | 12 - 32 mm |
Direct arbor | 19 mm weldon |
Magnet Size | 84 x 168 x 41,5 mm |
Stroke | 160 |
Weight | 12 Kg |
Swivel Base | No |
900 watch | single speed |
Speed range 1 | 450 min-1 |
Voltage | 230 V AC , 50-60Hz |
Twist Drilling | Less Than or Equal 13 |
Permanent internal lubrication | Yes |
Motor Output | 900 watt |
diameter | 35 |
depth | 55 |
Product Details:
Motor Output | 2300 Watt |
Full Wave Control Electronics | Yes |
Speed range 1 | 30 - 80 min -1 |
Weight | 51 kg |
Magnet Size | 120 x 360 x 65 mm |
Stroke | 310 mm |
Voltage | 230 V AC , 50-60Hz |
Magnet Indicator | Yes |
Torque Control | Yes |
Carbon Brush Wear control | Yes |
Speed range 4 | 210 - 550 min-1 |
Reaming | Less Than Or Equal 50 mm |
Core drill extra-long 110 mm | 20 - 120 mm |
CW CCW Rotation | Yes |
Speed range 2 | 50 - 120 min-1 |
Countersinking | Less Than Or Equal 80 mm |
Speed range 3 | 130 - 350 min-1 |
Morse taper | MT 4 |
Thread Cutting | Less Than Or Equal M4 2 |
Permanent internal lubrication | Yes |
Swivel Base | No |
Overheating Protection | Yes |
Friction Clutch | Yes |
Direct arbor | 32 mm weldon |
Core dril long 55 mm | 12-120 mm |
Twist Drilling | Less Than Or Equal 45 mm |
The made in Germany worlds most powerful magnetic drilling and tapping machine - MAB 1300 This magnetic core drilling machine meets all theexpectations that arise in arising in heavy engineering & fabrication shipbuilding production engineering etc Core drilling up to 130 mm (30 mm cuttingdepth) the whole spectrum of BDS core drills can be used with this machine twist drilling reamingcountersinking and thread cutting to M42As a standard the MAB 1300 has a direct arborwith 32 mm Weldon shank (1 14") and a MorseTaper MT 4 If the steady is removed which can be done injust a few moments the machines stroke can be extended to a remarkable 310 mm The machine is fully equipped with all the safetymeasures of current magnetic core drilling technology protection from machine overheating protection from tool damage alerts when the carbonbrushes are worn and a warning when the magnet holding force is too lowThe MAB 1300 drilling system is delivered asstandard in a stable carry case on wheels madeout of impact resistant plastic It is thus veryportable and easy to handle despite its weighty51 kgThe MAB 1300 even though being such a powerful machine it uses Single Phase power supplythus helping to reduce the power consumption.
Features
Product Details:
Weight | 25 Kg |
Motor Output | 1800 Watt |
Carbon Brush Wear Control | Yes |
Magnet Indicator | Yes |
Countersinking | Less Than or Equal 50mm |
Permanent internal Lubrication | Yes |
CW CCW Rotation | Yes |
Overheating Protection | Yes |
Morse taper | MT 3 |
Quick Change Drill Chuck System | Keyless 19 mm |
Industrial Aarbor | MT3 , 32mm Weldon |
Stroke | 255 mm |
Voltage | 230 V or 110 V AC |
Swivel Base | No |
Twist Drilling | Less Than or Equal 31.75 mm |
Thread Cutting | Less Than or Equal M30 |
Magnet Size | 110 x 220 x 54 mm |
Full Wave Control Electronics | Yes |
Torque Control | Yes |
Reaming | Less Than or Equal 31.75 mm |
The made in Germany, MAB 825 Mag Drill - The unique feature of MAB 825 mag drill is that the it is equipped with reversible motor. A reversible motor of the mag drillis absolutely necessary to do rreversible motor of the mag drilltapping or thread cutting. Once the tapping is finished, with reversible motor of the mag drillyou can remove the taps at the entry of the holes, which helps prevent the threads to get damaged. reversible motor of the mag drillis also useful for right hand as well as Left hand taps. With a reversible motor of the mag drillthere is no need of extra tap-head attachment. Powerful & Reliable, 16 Amp double-insulated motor, 4-speed oil bath gearbox for applications requiring high power, Designed for continuous use, Infinitely variable torque control and full-wave control electronics, Drill up to 4" dia. & Tap up to 1-1/8" dia., Uses annular cutters, Twist drilling and reaming up to 1-1/4" dia. Tapping capacity 1-1/8" dia., Optional geared chuck IBC 21, Integrated cutting oil reservoir, Automatic internal lubrication, Automatic feed (model MAB 825 V), ideal for production applications, Swivel base (model MAB 845), Keyless Cutter Mount, Quick-change keyless cutter system for 3/4" Weldon shank, Arbor for 1-1/4" Weldon shank, Integrated Safety, Green/Red LED magnetic force indicator for safe operation, Internal cable routing, Simple, ergonomic arrangement of controls for one-handed operation, Emergency-off function.
Features:
Core drill short 30 mm | 12 -100 mm |
Core dril long 55 mm | 12 - 100 mm |
Core drill extra-long 110 mm | 20 -60 mm |
Speed range 1 | 40 - 110 min-1 |
Speed range 2 | 65 - 175 min-1 |
Speed range 3 | 140 - 360 min-1 |
Speed range 4 | 220 - 600 min-1 |
Product Details:
Core drill short 30 mm | 12-40 mm |
Magnet Size | 84 x 168 x 41.5 mm |
Voltage | 230 V AC , 50-60Hz |
Thread Cutting | Less Than M16 |
Magnet indicator | Yes |
Torque Control | Yes |
Stroke | 160 mm |
Motor Output | 1150 Watt |
Speed range 1 | 50 - 250 min-1 |
Reaming | Less Than 18 mm |
Permanent internal lubrication | Yes |
CW CCW Rotation | Yes |
Twist Drilling | Less Than 18 mm |
Carbon Brush Wear Control | Yes |
Overheating Protection | Yes |
Quick change drill chuck-system | keyless 19 mm |
Speed range 2 | 100 - 450 min-1 |
Countersinking | Less Than 40 mm |
Morse taper | MT 2 |
Weight | 13 Kg |
Swivel Base | No |
Full Wave Control Electronics | Yes |
Product Details:
Reverse Rotation | Yes |
Power Consumption (in Watt) | 1600 |
Core drill extra-long 110 mm | 18 -50 mm |
Countersinking | Less Than or Equal 50 mm |
Quick Change Drill Chuck System | Keyless 19 mm |
Speeds | 70 - 280 min-1, 180 - 580 min-1 |
Model No | MAB 525 |
Magnet Indicator | Yes |
Twist Drilling | Less Than or Equal 20 mm |
Swivel Base | No |
Overheating Protection | Yes |
Voltage | 230 V AC |
CW CCW Rotation | Yes |
Friction clutch | Yes |
Stroke | 160 mm |
Reaming | Less Than or Equal 20 mm |
Motor Output | 1600 Watt |
Carbon Brush Wear Control | Yes |
Full Wave Control Electronics | Yes |
Permanent internal lubrication | Yes |
Frequency | 50-60 Hz |
Thread Cutting | Less Than or Equal M20 |
Weight | 16 Kg |
Torque Control | Yes |
Morse taper | MT3 |
Magnet Size | 90 x 180 x 48 mm |
Core drill short 30 mm | 12-50 mm |
The Made in Germany MAB 525 magnetic drill press Robust and lightweight! With two-stage oil bath gearbox,thread cutting up to M 20. The advantages of the MAB 525 > Best choice for service work Total weight only 16 kg > With MT 3 tool holder and a drilling performance of up to A 50 mm > Torsion-resistant design, monoblock gearbox and slide Powerful & Reliable 14.5 Amp double-insulated motor 19" high, 35 lbs. High-speed, 2-speed oilbath gearbox, ideal for annular cutters and twist drills Designed for continuous use Intelligent electronic torque control Drill up to 2-1/2" dia. & tap up to 15/16" dia. Uses annular cutters Twist drilling up to 1" diameter (with optional chuck IBC 21) Tapping capacity 15/16" Integrated cutting oil reservoir Automatic internal lubrication Swivel base (model MAB 525 SB) Keyless Cutter Mount Quick-change keyless cutter system for 3/4" Weldon shank Integrated Safety Green/Red LED magnetic force indicator for safe operation Internal cable routing Simple, ergonomic arrangement of controls for one-handed operation Emergency-off function.
Features
Two-stage oil bath gearbox
Core drilling up to 50 mm
Reversible motor
Magnet indicator
MT 3 Morse Taper
Safe switches
Complete internal cabling
Full wave control electronics
Product Details:
diameter | 40 m |
depth | 55 m |
Motor Output | 1150 Watt |
Speed range 2 | 450 min-1 |
Twist Drilling | Less Than or Equal 18 mm |
Permanent Internal Lubrication | Yes |
Quick Change Drill Chuck System | Keyless 19 mm |
Swivel Base | No |
Stroke | 160 mm |
Weight | 13 Kg |
1150watth | 50 |
Voltage | 230 V AC |
Morse taper | MT 2 |
Frequency | 50-60 Hz |
Magnet Size | 84 x 168 x 41,5 mm |
Speed range 1 | 250 min-1 |
Overheating Protection | Yes |
The made in Germany, 40 mm dia. drilling with morse taper 2 heavy duty magnetic base drilling machine. Powerful & Reliable 10.5 Amp double-insulated motor, 17-1/4" high, 29 lbs., High-speed, 2-speed oilbath gearbox, ideal for annular cutters and twist drills, Designed for continuous use, Intelligent electronic torque control, Drill up to 2" dia., Uses annular cutters, Twist drilling up to 7/8" diameter, Integrated cutting oil reservoir, Automatic internal lubrication, Swivel base (model MAB 455 SB), Keyless Cutter Mount, Quick-change keyless cutter system for 3/4" Weldon shank, Integrated Safety, Green/Red LED magnetic force indicator for safe operation, Internal cable routing, Simple, ergonomic arrangement of controls for one-handed operation, Emergency-off function. The motor gearbox of the BDS magnetic drilling magnetic base drilling machines are made of oil bath unlike the grease or fat gearbox from other manufacturer. The disadvantage of grease or fat gearbox is that when the grease is in Solid state the gearbox the completely filled with grease but, after working with the magnetic base drilling machine the gearbox of the magnetic base drilling machine gets heated up changing the solid Druckstate of grease to liquid state. In liquid state the level of grease decreases and there is no lubrication for the upper gears, which thus in time damages the gearbox. The advantage of BDS oil bath gearbox is that oil in cold or hot temperature is always in liquid state, hence oil always provides lubrication to upper as well as lower gears, thus increasing the service life of the magnetic base drilling machine drastically.
Features:
Core drill short 30 mm | 12-40 mm |
Core dril long 55 mm | 12-40 mm |
Product Details:
Drilling Diameter | 32 mm |
Twist Drill Capacity | 13mm |
Brand | Rotabroach |
Model Name/Number | Element 30 |
Warranty | 6 months |
No Load Speed | 600rpm |
Product Details:
Automation Grade | Semi Automatic |
Usage/Application | Industrial |
Power Source | Electric |
Frequency | 50-60 Hz |
Voltage | 380-415 V |
Weight | 9.9 Kg |
Swivel Base | No |
Stroke | 70 mm |
We are offering Broach Cutter Machine
We also offer these products in a variety of sizes and dimensional provisions to match with our clients changed demands. Also, these are accessible with us in a plethora of sizes and provisions to meet with our clients varying needs.
Product Details:
Motor Output | 1800 Watt |
Industrial Arbor | MT 3,32 mm weldon |
Carbon Brush Wear Control | Yes |
Permanent internal Lubrication | Yes |
Thread Cutting | Less Than or Equal M30 |
Reaming | Less Than or Equal 31.75 mm |
Morse Taper | MT 3 |
Quick Change Drill Chuck System | Keyless 19 mm |
Torque Control | Yes |
Magnet Size | 110 x 220 x 54 mm |
Magnet Indicator | Yes |
Full Wave Control Electronics | Yes |
CW CCW Rotation | Yes |
Overheating Protection | Yes |
Countersinking | Less Than or Equal 50 mm |
Twist Drilling | Less Than or Equal 31.75 mm |
Stroke | 255 mm |
Swivel Base | Yes |
Voltage | 230 V or 110 V AC |
Weight | 25 Kg |
The made in Germany, MAB 845 Mag Drill. The MAB 825 magnetic drilling machines can also be bought with a Swivel Base option (the model is then called MAB 845). The Swivel Base is an adjustment device on BDS magnetic core drilling machines, which helps the operator to position the machine aeven under magnetic condition.a The operator can move the machine 30A Degree left or right and 20 mm backward or forward that too when the magnet is activated. This is a useful when drilling multiple holes close to each other (like on boiler plates) or when drilling in vertical position or overhead position. Overheat protection. One of the very useful feature of MAB 825 / MAB 845 specially for new operator is the overheat protections. Due overload or improper handling of the machine while drilling the machine may get heated and due to heat the motor may get damaged. The BDS magnetic drilling machines protects the machine from overheat by shutting down the motor when the sensors senses overheat, this prevents in damaging of the motor. After the motor is shut down by the overheat protection, keep the machine idle for 30 seconds to 1 minute and then run the run the motor again without drilling. Run the motor for a minute and then start to drill again. This feature increases the machine service life as well as avoids accidents.
Features
Swivel base adjustment feature
Four-stage oil bath gearbox
Full wave control electronics
Reversible motor
Magnet indicator
Swivel Base
Safe switches
Complete internal cabling
Specifications
Core drill short 30 mm12 -100 mmCore dril long 55 mm12 - 100 mmCore drill extra-long 110 mm20 -60 mmSpeed range 140 - 110 min-1Speed range 265 - 175 min-1Speed range 3140 - 360 min-1Speed range 4220 - 600 min-1
Product Details:
Material | Mild Steel |
Usage/Application | Industrial |
Weight (kg) | 17 Kg |
Cooling Type | With Drilling Emulsion |
Quick change drill chuck-system | Keyless 19 mm(3/4') |
Stroke | 160 mm |
Voltage | 230 V AC , 50-60Hz |
Motor Output | 1600 Watt |
Core drill short 30 mm | 36 mm |
Speed range 1 | 70 - 280 min-1 |
Morse taper | MT3 |
Speed range 2 | 180 - 580 min-1 |
We are offering Rail MAB 925 Drilling Machine.
We also offer these products in a variety of sizes and dimensional provisions to match with our clients changed demands. Also, these are accessible with us in a plethora of sizes and provisions to meet with our clients varying needs.
Product Details:
Minimum Order Quantity | 1 Unit |
Material | Mild Steel |
Usage/Application | For lifting MS plates, angles, channels, beams, plates |
Brand | Dammer |
Color | Yellow Steel |
Power | Manual |
Capacity | 200kg to 3000kg |
Additional Information: